Bike Storage shed x 4

Description

Bike Storage Shed x 4

Bike Storage shed x 4  offers all metal bike storage for 4 bikes.

This is so much more than just a simple bike shed.

The all-metal storage shed provides peace of mind for you and all your bike security and storage needs.

Weighing in at 18 stone (114kg) and built from thick, heavy-gauge, galvanized (weatherproof) steel panels with a strong integral metal floor, a large reinforced, easy lift (gas lift) lid, and, reinforced, double door front access, this is an ideal home for your most valuable road bikes, cross bikes, and mountain bikes.

Storage for up to 4 bikes

For simple, easy storage this bike shed has a gas-assist lift-up lid, which gives great visual and physical access to your cycles and riding equipment.

To give you enhanced security, this bike store is fitted with two external stainless steel (and stainless steel shrouded) locking points and an integral deadbolt (steel) locking bar. inside the doors.

This stylish and compact bike shed has been designed to enhance bike security and general bike storage – with a (heavy duty) full metal base that can be bolted to the ground (with the supplied heavy duty fixing bolts). Stainless steel is up to 4 times stronger than mild steel.

You can further increase the storage capacity of the shed, by adding bike shed accessory packs (hooks and shelves).

Note: Please be aware that you may not be able to fit more than two shelves inside the unit if you plan on storing more than 4 bikes, always check before ordering.

This shed is designed and made in the UK and supplied with a free 10 Year Warranty and free UK mainland delivery.

We can install if you require.

Our installation service includes:

Each shed panel is visually checked for defects or damage.

Full erection of the shed.

Levelling of the shed using packers (where feasible) for smooth operation of doors and locks.

Applying clear silicone to any applicable areas.

Ground fixing (bolting the unit to the ground).

Please note that before an installation can take place a level, firm surface will be required. (e.g. concrete, tarmac, patio 50mm/2″ thick) before installation. The base must be solid, completely flat and secure.

Please note it is the responsibility of the customer to ensure there is a level surface and adequate access and space for the unit to be built. If, on arrival our installation team is unable to build the unit. You will be charged in full.